Rubber products
Latex Concetrates
Pale Latex Crepe Grades
Technically Specified / Crumb Rubber
Specifications for ISNR Grades achieved by HML?
Special Grades
 Latex Concentrates
|
|
Pale Latex Crepe Grades
|
|
Technically Specified / Crumb Rubber
|
 |
 |
 |
 |
| Grade |
Applications |
Packing |
|
| ISNR 5 |
Used for general purpose moulded and extruded products, components of passenger vehicles, engine mountings, sealing rings, cushion gum, brake seals, bridge bearings, ebonite battery plate separators, adhesives & plant linings |
25 kg bales |
 |
| ISNR 10 |
Used for puncture patches for tyres, inner tubes, cushion gums stocks, joint rings by injection moulding, raincoat proofing, nicro-cellular sheets for upholstery and packing, conveyor belts and footwear |
25 kg bales packed in polythene bags |
 |
ISNR 20
Tyre Grades |
A tailor made grade of rubber used for manufacture of all types of tyres& re-treading material |
25 kg bales packed polythene bags |
 |
| ISNR 20 |
Used mostly for tyres, cushion gum stock, bicycle tyres, raincoat proofing
micro-cellular sheets for upholstery and packing, conveyor belts & footwear |
25 kg bales packed in polythene bags |
|
|
 |
 |
 |
 |
|
Specifications for ISNR Grades achieved by HML
|
|
|
|
|
| Grade |
ISNR 5 |
ISNR 10 |
ISNR 20 |
ISNR 20 |
ISNR 50 |
| Dirt % |
0.05 |
0.10 |
0.15 |
0.20 |
0.50 |
| Volatile Matter % (Max) |
0.80 |
0.80 |
0.80 |
0.80 |
0.80 |
| Ash content (Max) |
0.50 |
0.75 |
0.75 |
1.00 |
1.50 |
| Nitrogen (Max) |
0.60 |
0.60 |
0.50 |
0.60 |
0.60 |
| PO (Min) |
30 |
30 |
35 |
30 |
30 |
| PRI (Min) |
60 |
50 |
57 |
40 |
30 |
|
|
|
|
|
|
Special Grades
|
Constant viscosity grades for easier mixing - TSR 3L / 3 CV - viscosity - 60
ISNR grades are covered by test reports
|
|
|
